Heated Purge Desiccant Dryer

Heated Purge Desiccant Dryer

The dehumidification drying feeder integrates three functions of dehumidification, drying and two-stage feeding, and is especially suitable for engineering plastic raw materials with strong hygroscopicity. Such as PA, PET, PC, PBT, etc. Among them, the optical grade GCD-OP model can be used in...
Pošaljite upit
Uvod u proizvod

The dehumidification drying feeder integrates three functions of dehumidification, drying and two-stage feeding, and is especially suitable for engineering plastic raw materials with strong hygroscopicity. Such as PA, PET, PC, PBT, etc. Among them, the optical grade GCD-OP model can be used in the process application of optical grade products such as lenses, LCD light guide plates, and optical discs. Under ideal conditions, the lowest dew point can reach below -40°C .

desiccant-air-dryer-for-compressed-air36230516923

 

How it worksEdit Broadcast
Dehumidification and drying part: the humid and hot air returned from the drying material barrel is cooled and blown into the honeycomb runner. Moisture in the air is adsorbed by the rotor and desorbed by the regenerated heated air. The two airflows act on the runner at the same time, and with the rotation of the runner, the moisture in the air is continuously absorbed and desorbed by the regeneration air and discharged, forming a stable low dew point air, which is heated to the plastic It is blown into the drying material barrel at a certain drying temperature to form a closed cycle to dry the raw materials.
Suction part: The suction is sucked into the drying bucket from the storage tank or other storage bin containers. When the reed switch of the vacuum hopper detects that there is no material, the suction motor will run to generate a vacuum in the vacuum hopper. The raw material in the storage barrel is sucked into the vacuum hopper due to the pressure difference of the air. When the suction time is completed, the suction motor stops, and the raw material will fall into the drying barrel due to its own weight. The dried raw materials are pumped from the drying barrel into the electric eye hopper installed in the plastic molding machine.

Popularni tagovi: heated purge desiccant dryer, йылытылған вентилятор нигеҙендә һауала киптергес, вентилятор һауа киптереү технологияһы менән йылылыҡ, һауа киптереү өсөн һауаны вентилятор ярҙамында йылытҡан, йылытылған һауала киптереүҙең вентиляторы менән етештереүсәнлеге, йылытылған вентилятор һауаны киптереү аппараты, эҫе һауа киптергес менән вентилятор

Moglo bi vam se i svidjeti

Pošaljite upit

whatsapp

Telefon

E-pošte

Upit